product description

Crude isopentene is a product obtained by hydrogenation and rectification with the C5 by-product of the ethylene cracking unit as the raw material. Crude isopentene is a colorless or light yellow liquid, exists in liquid form at room temperature, has the characteristics of low flash point and high volatility, and is a Class A flammable and explosive substance. Its steam and air form an explosive mixture, which is easy to burn and explode in case of open flame and high temperature. In contact with the oxidant, it will react strongly and even cause combustion. Its vapor is heavier than air, and can spread to a considerable distance at a lower place, causing flashback in case of an open flame. In case of high heat, polymerization reaction may occur, and a large amount of exothermic phenomenon will occur, causing container rupture and explosion accidents.

  Product Usage

The main application field is the production of raw materials added to piperylene resin.

  Quality Index

packaging, storage and transportation

This product can be sealed and packed in steel tank cars and fixed steel tanks. Steel tankers or steel tanks must comply with relevant safety regulations. The filling volume cannot exceed 85% of the total volume.

This product is transported by car tanker or train tanker. A car tanker or a train tanker must comply with the relevant safety regulations. In the process of transportation and loading and unloading, the contents must be clean, and collision and leakage are strictly prohibited, and sun protection facilities should be used, away from fire sources, and electrostatic grounding should be done. It must comply with relevant transportation safety regulations. The steel tanker or steel tank storing this product must comply with the safety technical specifications of the country and the industry, and must be isolated from the air. There is an intuitive level gauge and a red line marking the maximum allowable level. It should not be stored for a long time. It should be stored separately with oxidants and acids.

Safety accessories and facilities must be in good condition. The storage tank must be installed in a fire-proof, explosion-proof and well-ventilated place, not exposed to sunlight, and away from fire sources. Observe the relevant safety regulations for the storage of flammable and explosive materials during storage.

  Precautions

This product is a Class 1 flammable liquid. The storage and transportation containers and vehicles must meet the requirements of national safety regulations. When purchasing this product, please be sure to ask the company for safety technical instructions, and take safety and protective measures in accordance with the requirements of the safety technical instructions. .