"Jingbo Lake Brand Hydrogen Peroxide Disinfectant" Enterprise Standard Q/231003XXHG06-2019 The product function: used for oxidation treatment of drinking water. Usage requirements: Directly add 27.5% concentration hydrogen peroxide solution per liter of water, and evenly contact the water for 30 minutes, the maximum dosing amount per liter of water is 21.8mg, and the treated drinking water meets the requirements of "Sanitary Standards for Drinking Water" GB5749-2006. Note: This product is a strong oxidant hazardous chemical, which can be mixed with water at will. It should be stored in a cool, dry, ventilated, rainproof, and clean warehouse. It is strictly forbidden to mix with flammable, combustible materials, reducing agents, acids, metal powders, and handle with care during transportation to prevent damage to packaging and containers. Sun protection and rain protection measures should be taken during transportation, and loading and unloading should be avoided upside-down. The fire extinguishing agent is: water, dry powder, sandy soil. Wear acid and alkali-resistant overalls, protective glasses, and rubber gloves when working. If it splashes into the eyes, rinse with plenty of water for 15 minutes and seek medical attention immediately. It is strictly forbidden to inhale or swallow, and take protective measures when working. After skin contact, remove contaminated clothes and rinse with plenty of water. After inhalation, quickly leave the scene to a place with fresh air and keep the respiratory tract unobstructed. The appearance of the product solution is a colorless transparent liquid with a slight pungent odor. Hydrogen peroxide is an oxidizing component, and the concentration of hydrogen peroxide is ≥27.5%. Packed in 1000kg plastic drum or 25kg plastic container, this product belongs to 5.1 category of strong oxidant dangerous chemicals.